Microsens 10/100Base-TX to 100Base-FX Bedienungsanleitung PDF herunterladen (Seite 13)

9. Cable Connection Parameter

100Base-X network allows 512-bit time delay between any two node-stations in a

collision domain. Switch-based Media Converter breaks up TP and Fiber segments’

collision domain to extend the cabling distance.

 TP Cable Limitations: Cat. 5 and up to 100m

 Converter Fiber Cable Limitations:

SC/ST Converter Models

Multi-mode Half-duplex

412m

Multi-mode Full-duplex

2Km

Single-mode Half-duplex

412m

Single-mode Full-duplex

15Km

10. TP-Fiber Technical Specifications

•

Standards

:IEEE802.3u 10/100Base-TX, 100Base-FX

• UTP Cable

:Cat. 5 cable and up to100m

Fiber Cable

50/125, 62.5/125 or 100/140µm multi-mode

8.3/125, 8.7/125, 9/125 or 10/125µm single-mode

• LED Indicators :

POWER, TP LNK/ACT, 100, FX LNK/ACT, FDX/COL

• Data Transfer Rate :

Speed

Forwarding Rate

100Mbps

148,800 PPS

10Mbps

14,880 PPS

• Flow Control: IEEE802.3x compliant for full-duplex

Backpressure flow control for half-duplex

• Power Requirement

: 1A@+5VDC above AC-DC Adapter

to 50

C (Commercial)

1A@+5VDC above AC-DC Adapter

to 60

C (Industrial)

•

Ambient Temperature

: 0

to 50

C (Commercial)

: 0

to 60

C (Industrial)

• Humidity : 5% to 90%

• Dimensions : 26.2(H) × 70.3(W) × 94(D) mm

• CE Mark

Note: For connecting this device to Router, Bridge or

Switch, please refer to the corresponding device's

Technical Manual.

1 2 ... 8 9 10 11 12 13

Kommentare zu diesen Handbüchern

Keine Kommentare

Microsens 10/100Base-TX to 100Base-FX Bedienungsanleitung Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Microsens 10/100Base-TX to 100Base-FX