Microsens RS232 Spezifikationen PDF herunterladen (Seite 17)

4 Port Industrial Device Server Manual page 17/36

MICROSENS GmbH & Co. KG - Küferstraße 16 - 59067 Hamm - Tel. +49 2381/9452 0 - Fax 9452 100 - www.microsens.com

Ethernet to

Serial

Delimiter:

You can define max. 4 delimiters (00~FF, Hex) for each way. The data will be

hold until the delimiters are received or the option “Flush Ethernet to Serial

data buffer” times out. 0 means disable. Factory default is 0.

Flush Data Buffer After:

The received data will be queuing in the buffer until all the delimiters are

matched. When the buffer is full (4K Bytes) or after "flushE2S data buffer"

timeout the data will also be sent. You can set the time from 0 to 65535

seconds.

Force TX

Interval Time

Force TX interval time is to specify the timeout when no data has been

transmitted. When the timeout is reached or TX buffer is full (4K Bytes), the

queued data will be sent. 0 means disable. Factory default value is 0.

Service Mode – Virtual COM Mode

In Virtual COM Mode, The driver establishes a transparent connection between host

and serial device by mapping the Port of the serial server serial port to local COM

port on the host computer. Virtual COM Mode also supports up to 5 simultaneous

connections, so that multiple hosts can send or receive data by the same serial

device at the same time.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

Keine Kommentare

Microsens RS232 Spezifikationen Seite 17