Microsens RS232 Spezifikationen PDF herunterladen (Seite 18)

4 Port Industrial Device Server Manual page 18/36

MICROSENS GmbH & Co. KG - Küferstraße 16 - 59067 Hamm - Tel. +49 2381/9452 0 - Fax 9452 100 - www.microsens.com

The following table describes the labels in this screen.

Label

Description

Map Virtual COM

Select a Virtual COM Name to map on.

Max Connection

The number of Max connection can support simultaneous connections

are 5, default values is 1.

Idle Timeout

When serial port stops data transmission for a defined period of time

(Idle Timeout), the connection will be closed and the port will be freed

and try to connect with other hosts. 0 indicate disable this function.

Factory default value is 0. If Multilink is configured, only the first host

connection is effective for this setting.

Alive Check

The serial device will send TCP alive-check package in each defined

time interval (Alive Check) to remote host to check the TCP

connection. If the TCP connection is not alive, the connection will be

closed and the port will be freed. 0 indicate disable this function.

Factory default is 0.

*Not allowed to mapping Virtual COM from web

Service Mode – TCP Server Mode

In TCP Server Mode, DS is configured with a unique Port combination on a TCP/IP

network. In this case, DS waits passively to be contacted by the device. After a

connection is established, it can then proceed with data transmission. TCP Server

mode also supports up to 5 simultaneous connections, so that multiple device can

receive data from the same serial device at the same time.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

Keine Kommentare

Microsens RS232 Spezifikationen Seite 18