Microsens RS232 Spezifikationen PDF herunterladen (Seite 30)

4 Port Industrial Device Server Manual page 30/36

MICROSENS GmbH & Co. KG - Küferstraße 16 - 59067 Hamm - Tel. +49 2381/9452 0 - Fax 9452 100 - www.microsens.com

Label

Description

Destination Host

Set the IP address of host and the port number of data port. .

Idle Timeout

When serial port stops data transmission for a defined period of time

(Idle Timeout), the connection will be closed and the port will be freed

and try to connect with other hosts. 0 indicate disable this function.

Factory default value is 0. If Multilink is configured, only the first host

connection is effective for this setting.

Alive Check

The serial device will send TCP alive-check package in each defined time

interval (Alive Check) to remote host to check the TCP connection. If the

TCP connection is not alive, the connection will be closed and the port

will be freed. 0 indicate disable this function. Factory default is 0.

Connect on

Startup

The TCP Client will build TCP connection once the connected serial device

is started.

Connect on Any

Character

The TCP Client will build TCP connection once the connected serial device

starts to send data.

Service Mode – UDP Client Mode

Compared to TCP communication, UDP is faster and more efficient. In UDP mode, you

can Uni-cast or Multi-cast data from the serial device server to host computers, and the

serial device can also receive data from one or multiple host.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36

Keine Kommentare

Microsens RS232 Spezifikationen Seite 30