Microsens RS232 Spezifikationen PDF herunterladen (Seite 46)

19'' 6U Chassis page 46/71

Resets

The following describes the various methods of resetting the MGNT board.

Under no circumstances should a Reset be attempted during the Installation Phase of

the SNMP Agent Update procedure. Consult the object:

mgnt2PackageExtractionInProgress. Ensure it is set to “off” before continuing.

Warm reset

This reset has no effect on the traffic and takes 35 seconds to complete.

Procedure

• Start the reset:

• Set to “on “the object: mgnt2CtrlChassisWarmReset

Location:

…\microsens\mgnt2\mgnt2Hardware\mgnt2controls\mgnt2Ctrlsynth5\

Visual indication:

The colour sequence of the SW LED on the front panel of the MGNT during a

warm reset is:

Green > Red (few seconds) > Orange (less than 1 second) > Green

Under normal conditions all LEDs return to green when the reset is complete.

Refer to LED status table in Appendixes. The duration of a MGNT warm reset is

approximately 35 seconds, during which time the management function is

unavailable.

End procedure

Hardware reset

A hardware reset may be also performed on the MGNT. This reset has no effect on the

traffic and takes 35 seconds to complete.

Procedure

• Use a needle-like tool (i.e. paper clip) to reach the MGNT reset button and

press it during 1 second to perform a hardware reset of the MGNT.

MICROSENS GmbH & Co. KG - Küferstraße 16 - 59067 Hamm - Tel. +49 2381/9452 0 - Fax 9452 100 - www.microsens.com

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 70 71

Keine Kommentare

Microsens RS232 Spezifikationen Seite 46