Microsens RS232 Spezifikationen PDF herunterladen (Seite 51)

19'' 6U Chassis page 51/71

Upload a configuration

A user may upload the configuration of a MSxxxxxxx module to a PC via the MGNT

management board. The user gets the MSxxxxxxx configuration in an XML-like file. To

achieve this, you will need:

• An SNMP V2C browser (for reading and updating values in the MIB)

• A TFTP client

The configuration uploading procedure is carried out in three phases:

1. Create a backup file of MSxxxxxxx configuration in the FLASH memory (conf

partition) of the MGNT management board.

2. Transferring the backup file from the MGNT FLASH memory to the MGNT

RAM memory

3. Get the backup file in the MGNT RAM memory via a TFTP command.

Described in more detail as follows:

Procedure

1. Create a backup file

The object of this phase is to read the configuration of a dedicated MSxxxxxxx module

and store this configuration in a backup file.

• Use your SNMP browser to check the backup file presence in the FLASH

memory of the MGNT management board using the table:

• mgnt2CnfManageConfigFilesTable

Location: …\microsens\mgnt2\mgnt2ConfigManagement

There is one dedicated backup file for each MS430502M chassis Slot. At this stage

in the procedure, there should be no file in the FLASH memory.

• Create a backup file of configuration by setting:

mgnt2CnfBackupConfig

Location:…

\microsens\mgnt2\mgnt2ConfigManagement\mgnt2CnfManageConfigFilesTable

Linked to the dedicated MSxxxxxxx module. The MSxxxxxxx module is referenced

by the slot number where it is plugged in.

At this moment, a backup file is created in the FLASH memory of the MGNT

management board.

The back up file name is respecting the following format:

bkpConf + ‘slot number’

For instance, the backup file of the MS43062XM plugged in slot 5 will have the

following name:

bkpConf05

MICROSENS GmbH & Co. KG - Küferstraße 16 - 59067 Hamm - Tel. +49 2381/9452 0 - Fax 9452 100 - www.microsens.com

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 70 71

Keine Kommentare

Microsens RS232 Spezifikationen Seite 51